Restoring a wooden handled saw


This one is from earlier in the year that I’m quite pleased with but haven’t put on the blog yet. This is a Disston panel saw I got for 50c in what looked like quite bad condition.

I made the mistake of trying some rust converter on it at first and it made it impossible to use the citric acid method I use now on it, so the blade was cleaned up with a lot of hard sanding.

The handle got sanded down to 1200 grit then give a couple of coats of a water based stain and varnish, then the finish rubbed out with the 1200 grit again until it felt nice and worn in. I softened the edges of the handle, it was too square looking to my eye and just didn’t feel right.

The blade was set and sharpened and then waxed and it’s now working nicely.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s